2. Skip to content

2. Unpackaging a ChiefNET CPE

You should have received this document along with a physical ChiefNET CPE device to be installed on your premises.

The package contains the following components. If any items are missing, please email or call ChiefNET customer support:

  1. ChiefNET Physical CPE device
  2. Power supply with standard 110V/220V prongs

Note: You will need to provide Ethernet cables (CAT-5e or CAT-6) to connect the CPE device to your network devices, as they are not included in the package.


2.1 Cabling and Connections

Installing the CPE is simple and does not require technically skilled personnel. Anyone familiar with network devices and Ethernet cables can complete the installation.

  1. Connect to the Internet
    • Use Ethernet cables to connect Port-1 and Port-2 to your ISP-supplied devices.
    • Both Port-1 and Port-2 are configured as DHCP clients by default. Ensure your ISP-supplied devices provide IP addresses via DHCP.
  2. Connect to Your LAN Devices
    • Use Ethernet cables to connect Port-3, Port-4, and any additional ports available on the CPE to your LAN devices.
  3. Power On
    • Connect the power supply to the CPE and ensure it powers on. Look for blinking LEDs on the Ethernet ports to confirm operation.

Notes:

  • Ports are numbered from left to right, starting with Port-1.
  • The device label at the bottom includes the MAC address, which helps identify the device in the ChiefNET Orchestrator WebUI.
  • Take a picture of the label and the device after installation. Store the images in your company’s documentation system (e.g., SharePoint) for team reference.

2.2 Default Configuration

The ChiefNET CPE comes pre-installed with software and a simple default configuration. To begin:

  • Open your browser and navigate to https://prod.chiefnet.io.
  • Log in using the account created during the purchase or engagement process.
  • If you are a new employee, contact your organization’s IT administrator. They can create an additional user or administrator account for you.

Once logged in, you can view your organization’s devices and configure them as needed. Refer to the ChiefNET documentation online or the context-sensitive help within the WebUI for further guidance.


2.3 Device Reset and Additional Ports

Some devices may include additional ports, such as HDMI and USB ports. These ports are not intended for regular use.

Note: Your deployment instructions may specify using the USB port to connect a 4G/LTE/5G device as another ISP connection.


2.4 Installation with a Static WAN IP Address

If your site requires a static WAN IP address, follow these guidelines:

Before Shipping: - All ChiefNET CPE devices are preloaded with software and basic WAN configurations. By default, WAN ports are set to DHCP. - If a static IP is needed, notify the sales team to preconfigure the static IP before shipping.

After Shipping: - Connect the device to a DHCP-managed WAN network to establish a connection with the ChiefNET Orchestrator. - Use the WebUI to configure the static IP address. Once configured, the CPE will re-establish the management connection using the new static IP.